SECTION 1:
• Practical Bored Pile Foundation Design: Design concept, guides & checklists for comprehensive design, application & limitations.
• Guidelines for planning, evaluation & interpretation of SI for pile foundation design.
1. Checklists for what can go wrong in design & construction of pile foundation design.
2. Checklist for pile foundation design report preparation.
• Case histories to illustrate how to design bored piles with particular reference in estimation of axial, lateral load capacity, and settlement. The scheme of design validation will also be illustrated and presented.

SECTION 2: Case study 1
• Project brief related to site conditions/site contour plan, loadings and Client’s requirements for a mixed commercial housing project consisting of one block of high-rise RC buildings with deep basement car park near a high slope where retaining walls are required. The project site geology is Kenny Hill formation & the site terrain is generally hilly. Site plan with necessary details will be given.

SECTION 3: Case study 2
• Similar to case study 1, but in limestone formation.

SECTION 4: Case study 3
• Several maintained load test/PDA results for bored piles and will be given for the participants to evaluate, interpret, assess and recommendation whether the results are technically acceptable or otherwise.
• Comments & advices for the case studies will be discussed.

Ir. Neoh Cheng Aik Qualification : • Bachelor Engineering (Hon) from University of Malaya. • He was Vice President of IEM. (2004-2006) Strength : • Geotechnical design for foundations, walls and slopes and as an independent geotechnical design checker. • Published more than 50 technical papers on geotechnical and road engineering in various journals & bulletins. Current job : • Director of E-Geo Consultant Sdn. Bhd. Biodata : Ir. Neoh is Vice Precident of IEM (2004-2006), Chairman of Technical Committee for Geotechnics (TC5), Road Engineering Association Malaysia, (1997-2006) and also Chairman of IEM/CIDB/JPN organising committee. He joined PWD Malaysia (74'-98') for 25 Years after graduated from UM (1974). He is currently (2000-2007) the Director of E-Geo Consultant Sdn. Bhd. who mainly involved in geotechnical design for foundations, walls and slopes and as an independent geotechnical design checker. He has published more than 50 technical papers on geotechnical and road engineering in various journals & bulletins. He also presented in many local seminars and conferences.

Session	Scope	Speaker
Session 1 Day 1 0830-0900	Registration
Session 2 Day 1 0900-1030	SECTION 1: • Practical Bored Pile Foundation Design: Design concept, guides & checklists for comprehensive design, application & limitations. • Guidelines for planning, evaluation & interpretation of SI for pile foundation design. 1. Checklists for what can go wrong in design & construction of pile foundation design. 2. Checklist for pile foundation design report preparation. • Case histories to illustrate how to design bored piles with particular reference in estimation of axial, lateral load capacity, and settlement. The scheme of design validation will also be illustrated and presented.	Ir. Neoh Cheng Aik
Session 3 Day 1 1030-1100	Refreshment
Session 4 Day 1 1100-1300	SECTION 2: Case study 1 • Project brief related to site conditions/site contour plan, loadings and Client’s requirements for a mixed commercial housing project consisting of one block of high-rise RC buildings with deep basement car park near a high slope where retaining walls are required. The project site geology is Kenny Hill formation & the site terrain is generally hilly. Site plan with necessary details will be given.	Ir. Neoh Cheng Aik
Session 5 Day 1 1300-1400	Lunch Break
Session 6 Day 1 1400-1530	SECTION 3: Case study 2 • Similar to case study 1, but in limestone formation.	Ir. Neoh Cheng Aik
Session 7 Day 1 1530-1545	Refreshment
Session 8 Day 1 1545-1700	SECTION 4: Case study 3 • Several maintained load test/PDA results for bored piles and will be given for the participants to evaluate, interpret, assess and recommendation whether the results are technically acceptable or otherwise. • Comments & advices for the case studies will be discussed.	Ir. Neoh Cheng Aik
Session 9 Day 1 1700-1715	Question & Answer
Session 10 Day 1 1715-1730	Distribution of Certificate

Date and time	:	27-03-2010 (Saturday) 0900 - 1730
Venue	:	Seminar Hall,First Floor, Wisma Wawasan, No.19-1, Jalan PJS8/12, Dataran Mentari, Bandar Sunway, 46150 Petaling Jaya, Selangor Darul Ehsan
Location map	:	See location map
Fee	:	Normal Price RM 650.00 (If 2 or more RM 500.00 per person Only)

Civil Engineers, Geotechnical Engineers, Structural Engineers, Building & Piling Contractors, Consultants, Project Managers, RE, Lecturers & Academics.

• Certificate of CPD Point with full attendance
• 2 tea breaks & 1 lunch provided
• Handout notes